Custom Designs

Custom Design for construction of a Vertical Split Furnace

The furnace meets AMS 2750E class 3 and has instrumentation type B. The maximum temperature is rates at 625°C with a working volume of 5000mm high x 800mm diameter. Air re-circulation with a fan in the base and two zone control.

The customer needed a very fast temperature cool down rate to assist with the process but also to improve production time. The lid is removed from the top of the furnace at maximum temperature and the doors open below 200°C. The furnace uses low thermal mass insulation and for example will heat a 500kg load to 550°C, dwell at temperature for one hour and cool to ambient in a total of 4.5 hours.

Picture 1  – Design
Picture 2 – Completed Installation

Custom Designs

  • Horizontal or Vertical loading
  • Batch or Continuous
  • Electrically or Gas heated
  • Maximum temperatures up to 1250°C
  • Instrumentation to AMS2750
  • Fully automatic operation
  • PLC control with HMI (Siemens, Allen Bradley or other)
  • Air, Controlled Protective or Reactive Atmosphere or Vacuum

Case Study 1:

Industry: Automotive

  • Application: Annealing of Sintered parts
  • Maximum temperature: 1050°C
  • Heating: Electric
  • Equipment: Horizontal Trolley loading batch furnace
  • Atmosphere: Vacuum and Helium